Victron Phoenix 12V 750VA, 110V, Sinewave Inverter, NEMA 5-15R Socket

Phoenix 12V 750VA
750VA Sinewave Inverter
Input Voltage: 10,5-15,5 VDC
Output Voltage: 110VAC
Peak Power:1400 Watts
Output Connector: NEMA 5-15R Socket
Victron Phoenix 12V 750VA, 110V, Sinewave Inverter, NEMA 5-15R Socket

Part No: PIN012751110

 
Our Price: $446.00
 
 
Qty:
Seen it cheaper?
technical specVictron Energy Ask for more information quick code T615

Additional Information

12Vdc to 110VAC Sinewave Inverter

An affordable quality true sinewave inverter. Built to the same high standards as the rest of the Phoenix range, this power inverter will provide 700W (750VA) of continuous output. Its peak power of 1400W enables it to cope with devices that require an initial surge of power for a few seconds at startup.

  • Pure Sine Wave Output
  • 1400 Watt Peak Output
  • 700 Watt (750VA) Continuous
  • 2.7kg in weight
  • Screw Connection for Battery
  • Dimensions h72 x w180 x d295 (mm)

110V AC Output power connector is a NEMA 5-15R Socket, the mating plug is supplied. This unit is for the USA.

SinusMax - Superior engineering
 
Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimised efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load.
 
Extra start-up power
 
A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances. 

 Virtually unlimited power thanks to parallel and 3-phase operation capability  

Up to 6 units Phoenix 24/3000 can operate in parallel to achieve higher power output. Six 24/3000 units, for example, will provide 15 kW / 18 kVA output power. Operation in 3-phase configuration is also possible. (Please request VE.Bus enabled units for best 3 phase performance)

 To transfer the load to another AC source: the automatic transfer switch 

If an automatic transfer switch is required on models rated at 800 VA or more, we recommend to using the Phoenix Multi instead. The switch is included in these products and the charger function of the Multi can be disabled. For our lower power models we recommend the use of our Filax Automatic Transfer Switch. Computers and other electronic equipment will continue to operate without disruption because both the Filax and the Phoenix Multi feature a very short switchover time (less than 20 milliseconds).  
 

Computer interface 

All models rated at 1200 VA or more have a RS-485 computer interface. All you need to connect to your PC is our data link MK2 (see under accessories). This data link takes care of galvanic isolation between the inverter and the computer, and converts from RS-485 to RS-232. Together with the VEConfigure software, which can be downloaded free of charge from www.victronenergy.com , all parameters of the inverters can be customised. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to VENet, the new power control network of Victron Energy, or to other computerised monitoring and control systems.